081 476 2296

Ambient Air Monitoring

Passive (diffusive) ambient air sampling using Radiello samplers, certified to EN 13528:2002 and EN 14662-4.5:2005.

We perform ambient air monitoring using passive (diffusive) sampling with Radiello samplers — certified instruments (EN 13528:2002; EN 14662-4.5:2005) that require no electricity, pumps or supervision, produce no noise and are suitable for flammable or explosive environments. Passive samplers give an indication of average pollution levels over periods from 8 hours to weeks or months, and their low cost allows sampling at multiple locations to highlight pollution hotspots or determine long-term trends in a specific geographical area.

Components of Radiello: adsorbing cartridges, storage tubes and the supporting plate with clip and barcode label
Figure: Components of Radiello

Services within this scope

Passive (diffusive) air sampling

Cost-effective sampling that relies on unassisted molecular diffusion of gaseous agents onto an adsorbent, requiring no electricity, pumps or supervision for periods of 8 hours to several weeks. Passive samplers indicate average pollution levels over the sampling period.

Radiello ambient air monitoring

Radiello is an accurate, certified diffusive sampler (EN 13528:2002; EN 14662-4:2005). Its cylindrical diffusive body gives a larger sampling capacity than flat axial samplers, and it highlights pollution hotspots or long-term trends.

  • No energy consumption
  • No heavy or bulky pumps
  • No surveillance required
  • Silent operation
  • Suitable for flammable or explosive environments

How monitoring works

A straightforward procedure from deployment to reporting.

  • Radiello samplers deployed in weather-resistant housings on the site perimeter
  • Start and end dates and times recorded
  • Samples sent to a SANAS-accredited laboratory
  • Results compared with local and international standards
  • Ambient Air Quality Monitoring report with recommendations where possible

Personal monitoring (breathing zone)

Personal monitoring in the breathing zone is one of the applications of passive (diffusive) air sampling — the sampler can simply be worn for the sampling period.

Indoor air analysis

Indoor air analysis is one of our passive-sampling applications. Passive samplers give an indication of average pollution levels over the sampling period.

Outdoor ambient air analysis

Ambient air is any air on the external side of a pollution source’s boundary fence to which the public has access, including neighbouring industrial areas. Limits are derived from the Air Quality Act 39 of 2004, SANS 1929:2005 and other applicable standards.

Process and deliverables

    • We deploy Radiello Samplers in a weather-resistant housing on the site perimeter fences for a period of time.
    • Sampling starts extremely simply: the sampler is assembled, exposed to the air (by wearing it or hanging it) and the start date and time are recorded.
    • At the end of the sampling period the radiello is withdrawn and the date and time of end of sampling are recorded. We send the radiello samples to a SANAS accredited laboratory for analysis.
    • Once we have received the analysis report, we compare the analysed concentrations to local and international standards, compile an Ambient Air Quality Monitoring report and where possible, provide recommendations.

Frequently asked questions

What is ambient air?

Ambient air is defined as any air on the external side of a pollution source’s boundary fence to which the public have access. This includes industrial areas neighbouring a pollution source.

Which limits are results compared against?

The Ambient Air Quality Limits are derived from the National Environmental Management: Air Quality Act 39 of 2004, SA standards (SANS 1929:2005) and / or other standards / limits, where applicable.

Back to all services

Why organisations choose us.

  • Approved monitoring methods and reporting aligned to the relevant regulations
  • Thorough, detail-focused fieldwork carried out by our own team
  • Approachable and responsive — time taken to discuss concerns and questions
  • Punctual, professional delivery at competitive rates
  • 12 years of work across South African industries
KCM’s knowledge, attention to detail and approved monitoring methods have aided in keeping our company complaint with the relevant environmental regulations
Galvanizing company in Durban

12 years in operation (founded 2014) · Led by a qualified chemical engineer (BSc) · BEE level 1 company · Methods aligned to South African regulations and SANS standards · Based at Dube TradePort, KwaZulu-Natal · Serving South Africa and the wider Southern African region

  • Coca-Cola Beverages South Africa
  • AB InBev
  • Mondi
  • Tongaat Hulett
  • Mpact
  • AfriSam
  • Afrimat
  • Hulamin
  • Tiger Brands
  • Tata Chemicals
  • First Quantum Minerals
  • Grindrod
  • Vopak
  • Manganese Metal Company
  • InterCement
Request a Project Quote